Prominent & Leading Distributor / Channel Partner from Ludhiana, we offer tar felt lm bituminous liquid membrane, heat proof insulated rubberised waterproofing membrane, tikidan danosa india private limited app membrane, iwl waterproofing membrane and crystalline waterproofing coatings.
Tar Felt Lm Bituminous Liquid Membrane
Product Price: Rs 150 / KgGet Best Price
Product Details:
Color
Black
Elongation
200%
Brand
STP
Country of Origin
Made in India
Description ShaliKote?? T-10 / ShaliKote?? T-10A is water based bituminous emulsion with finely divided bitumen dispersed in water and is ready for application on wet surfaces. Characteristics Theoretical Coverage, kg/m2 * ??? On metal surface ??? On concrete surface 0.4 0.5 Dry film thickness per coat ??? On metal surface ??? On concrete surface 120 micron 80 micron Dry Time, hr ??? Touch Dry ??? Hard Dry 8 24 Colour Brown to Chocolate Consistency Brushable Specific Gravity 1.01 * Depending upon surface condition. ShaliKote?? T-10A has slightly lower solid content to provide smoother finish and better flow. Application ShaliKote?? T-10 / ShaliKote?? T-10A is recommended for waterproofing of leaky walls / surfaces or places where heating of bitumen is not desirable or prohibited. Advantages ShaliKote?? T-10 gives a coating, which, when set, is impermeable to water and remains unaffected by attacks of industrial fumes, saline atmosphere, etc. It resists low temperature cracking and also does not crack under the influence of strong sunlight. ShaliKote?? T-10A has smoother finish and better flow as compared to ShaliKote?? T-10. Application Methodology ??? Wire brush and clean the surface thoroughly to remove all dirt and loose particles. ??? Dilute ShaliKote?? T-10 from its pasty consistency to light consistency by adding water in the ratio of 1:1. Apply this diluted material on the roof surface as primer. No dilution should be done in case of ShaliKote?? T-10A. ??? When the primed surface is dry and has turned black from its original brown colour, apply ShaliKote?? T-10 and allow the emulsion to break. It will turn black from its original brownish colour. ??? When the emulsion has set in, spread coarse sand or crushed stone chips over the surface. Health & Safety ??? Avoid contact with skin / eyes, and avoid swallowing. ??? Ensure adequate ventilation and avoid inhalation of vapour. ??? Wear suitable protective clothing, gloves and eye protection. ??? In case of skin contact, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent to clean the contacted area. ??? In case of eye contact, wash with plenty of clean water and seek medical advice. ??? If swallowed, seek medical attention immediately. Do not induce vomiting.