Dr. Fixit Bathroom Waterproofing Solutions

Product Details:

Dr. Fixit Pidifin 2K is a acrylic cementitious, polymer modified flexible, waterproofing & protective coating composed of best quality Portland cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder. It is applied to waterproof and protect concrete and masonry substrates.Typical Application} Excellent as a waterproof coating for bathrooms, kitchen sinks, balconies, etc.} Ideal as a coating for waterproofing of roofs, chhajjas, canopies, etc.} As waterproof coating on internal sides of domestic water tanks.} Can be applied over internal damp walls and concrete surfaces due to its excellent bonding.Features} Flexible coating} This product can be used for both positive and negative side waterproofing due to its excellent bonding} Excellent adhesion to concrete and masonry surfaces} Excellent resistance to ingress of water} Confirms to portable water contact parameters.} Non-toxic with low VOC contentPackaging3 kg, 9 kg, 15 kg, 30 kg & 90 kgMethod of Application1 SURFACE PREPARATION} The surface of application must be thoroughly prepared by mechanical means, to remove all loose particles, laitance, etc. } Oil and grease, if any, must be de-greased with suitable solvents. It then must be washed off with jet of water and brought to touch dry state. Any surface undulations, cracks and crevices must be duly filled or repaired with cement sand mortar mixed with latex polymers such as Dr. Fixit Pidicrete URP. } All vertical up-stands & junctions /corners are provided with 45° fillet with Polymer Modified Mortar (PMM), mixed with Dr. Fixit Pidicrete URP all around the periphery of the junction. } Substrate must be in a Saturated Surface Dry (SSD) condition (damp, without standing water) prior to application.2 MIXING} Shake the liquid component well to a homogenous milky colour.} Use heavy duty slow speed mechanical mixer fitted with a suitable paddle for mixing the two components of the material.} In a mixing vessel, slowly add the powder component in to the liquid under continuous stirring. Continue to stir thoroughly to achieve a lump free homogenous slurry.3 APPLICATION} It is important that any pipe inserts or sanitary fittings should have been fitted grouted with suitable products from the Dr. Fixit range well before taking up the application.} Grout pipe inserts using Dr Fixit Bathseal Tape and Dr Fixit Bathseal Grout. } It is mandatory that all works of plumbing and sanitation must be complete before taking up application of Dr. Fixit Pidifin 2K.ACRYLIC CEMENTITIOUS TWO COMPONENT WATERPROOF COATINGDr. Fixit Pidifin 2K112 Pidifin 2

Product Details:

Bath Seal tape for Bathroom waterproofing