Cico Tapecrete P151

Product Details:

CICO TAPECRETE P-151 A Surface Treatment System for Protecting Concrete & Masonry CICO TAPECRETE P-151, popularly known as TAPECRETE is an acrylic based Polymer Modified Cementitious Flexible Composite coating system. CICO TAPECRETE P-151 in conjunction with cement provides properties to combat the shortcomings of plain cement, particularly its poor adhesion properties, low impact strength, low flexural strength and thin section fragility. CICO TAPECRETE P-151 polymer adds to the potential use as well as enhances the properties of cement slurry/ mortar/concrete making them excellent choice for use in new as well as renovation work. USES CICO TAPECRETE P-151 is used for surface treatment, protecting, waterproofing and repairing concrete and masonry. Waterproofing of basements, toilets, terraces, roofs, swimming pools, water towers etc. General concrete repairs. Protection of concrete against corrosion, salt attack etc. FEATURES  Combines a tough, flexible, hard-wearing surface with waterproofing.  Allows trapped vapour to escape thus preventing peeling and blistering.  Can be applied in uniform thickness to horizontal and vertical surfaces.  Develops excellent bond to most building materials.  Reduces or prevents salt penetration into concrete.  Is not affected by ultraviolet light or by chemicals ranging from mild acids to strong alkalies.  Is highly durable in continuous wet condition.  Is non-flammable and does not give off toxic gases, when exposed to fire.  Will not rot or corrode.  Most properties improve with age.  Is not harmful to the health of workman. METHOD OF USE Surface Preparation Prior to application of CICO TAPECRETE P-151, surface must be prepared as mentioned below to avoid failure and to achieve maximum beneficial properties.  The surface shall be cleaned to remove all dust, foreign matters, loose materials or any deposits of contamination which could affect the bond between the surface and the CICO TAPECRETE P-151 coating. This can be done by scarifying, grinding, water blasting, sand blasting, and acid washing or by any other approved method.  New flat surface like sub-base concrete shall be made reasonably smooth so as not to impede the application of CICO TAPECRETE P-151 coating and to avoid sharp projections.  All concrete surfaces shall be thoroughly pre-wetted prior to the application of CICO TAPECRETE P-151 coating by pouring water on flat surface or by spraying water on vertical/inclined surfaces.