Call 08046051047 86% Response Rate

Send Email

Starbond Star Technologies (SSPL)

Star Technologies (SSPL)
Starbond Super Latex 50 (Super Bonding Agent)
  • Starbond Super Latex 50 (Super Bonding Agent)
  • Starbond Super Latex 50 (Super Bonding Agent)

Starbond Super Latex 50 (Super Bonding Agent)

Product Price: Rs 225 / KgGet Best Price

Product Brochure

Product Details:
Packaging Size20 Kg
BrandStarbond (Star Technologies)SSPL
Packaging TypeBucket
Is it Eco FriendlyYes
Grade StandardIndustrial
SUPER LATEX 50(SBR Latex Based Bonding Admixture)DESCRIPTIONSTARBOND SUPER LATEX 50is SBR latex based waterproofing bonding agent designed as an integral adhesive for slurry bond coats, mortars and concrete to improve bond strength and chemical resistance. It is ideal for producing high abrasion resistant floors, for use in internal and external renderings, flooring screeds and patch repairs. When dry the finished mortars or concrete show a vastly improved resistance to water. It can be used where improvements in physical properties of Portland cement systems are required.ADVANTAGES Improves bond Strengths and to hardened concrete Increases durability under freeze/thaw cycling. Resistant to deicing salts. Reduce cracking through increased mortar flexural strength. Increases mortar wear resistance under rubber wheeled traffic. Increases mortar tensile strength.APPLICATION AREAS Toppings, patches and leveling course. Thin Sets, terrazzo, stucco and bonding slurries. General reconstruction work and latex modified overlays. Bridge decks, highway and parking decks.STANDARDSConforms to ASTM C 631-70(1975), ASTM C 932-80, ANSI A 136.1(1976)STORAGE & SHELF LIFEShelf life is 12 months in unopened container. Store in a cool , dry place away from sunlight.STORAGE Store out of direct sunlight and undercover.BONDING: For bonding toppings with this product, it is strongly recommended to use a slurry coat rather than using this product as a primer by itself.After the surface has been prepared, prime all areas with a slurry coat before the topping is applied. Follow mixing and placing instructions listed below. Place the topping on the slurry coat before it dries out.M IXING: Small quantities may be mixed with a drill and "jiffy" mixer. Use a paddle type mortar mixer for large jobs. Add the appropriate amount of SUPER LATEX 50for the batch size and then add the dry material. Mix a minimum of 3 minutes. The mixed product should be quickly transported to the repair area and placed immediately.PLACEM ENT: Discharge material from mixer and place onto floor.Slurry Application: Spread the slurry with a stiff bristle broom until the suggested coverage rate is achieved. Coating Application: Apply first coat with mixture of STARBOND SUPERLATEX : Water: Cement in ratio of 1: 2 : 5 by volume.Finishing: Finish the repair material to the desired texture is a broom or sponge float finish though mortars made with SUPERLATEX 50 can be steel. Do not add additional water to the surface during the finishing operation.CLEANINGClean tools and equipment with water before the material hardens.PACK ING SUPER LATEX 50 is available in 1kg, 5kg can, 10kg, 20 kg drum & 50,200 kg. Barrel.
Get Best QuoteRequest A Callback


Contact Us
Thank youYour Enquiry has been sent successfully.
© R.S. Enterprises. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.