Dr.fixit waterproofing experts

Product Details:

Dr. Fixit Roofseal is a single component cold applied elastomeric waterproofing coating based on synthetic resin
emulsion. It is a tough yet extremely flexible coating that can be efficiently applied by roller or squeegee.
Typical Applications
Waterproofing of flat concrete roofs.
Features
} Waterproofing - High film build up provides excellent water resistance.
} Elastomeric - Excellent flexibility and elongation properties - can easily accommodate all normal building
movements.
} Seamless - Can be applied to complex shapes to form a seamless and highly durable water proofing coating.
} Adhesion - Adheres firmly to most of building surfaces including concrete, brick etc. both horizontal and vertical
surfaces.
} Water based – Easy cleaning of tools and brushes by water.
} Easy to apply - Suitable consistency for easy application by brush, roller or squeegee.
Packaging 5 & 20 Ltrs
Method of Application
1 SURFACE PREPARATION
} Clean the entire roof with Pressure water jet to remove the unwanted dust, loose material, oil, or any other
material which may impair adhesion of the material. Surface must be cleaned and dried properly so that any
cracks on the substrate can be visible. Concrete substrate to be cleaned up to exposed sound concrete cover,
remove dust, laitance etc , which may impair adhesion of the material.
Mark the area having cracks
} All surface cracks up to 1-2 mm wide should be filled with Dr. Fixit Roofseal using a brush. Add a coat on the
slab on both sides of the crack, up to a distance of 100 mm around it. Cracks more than 1-2 mm should be widen
by making V-groove and repaired with PMM (Polymer Modified Mortar)using Dr. Fixit Pidicrete URP 10% by
weight of cement.
} All joints of vertical up stand should have 50 x 50 mm angle fillets prepared with sand –cement mortar; mixed
with Dr. Fixit Pidicrete URP.
} Curing to be provided to the angle fillets and repaired surface as per standard methodology before application
of coating.
} Apply one coat of Dr. Fixit Roofseal on the angle fillet area and put 45 gsm Glass fiber mesh 200 mm on both
the sides of the fillet to make the junction and corner’s receptacle to movements. The same treatment should
be carried out for Drain outlets.
2 Priming
} Primer is required only for high absorbent surface such as light weight concrete. Primer recommended to be
used is Dr. Fixit Primeseal.
3 Application
} Sprinkle some water over the roof just before application of Dr. Fixit Roofseal.
} Apply 2 coats Dr. Fixit Roofseal at 0.75 ltrs / m2/ coat, at an interval of 12 hrs between the coats and allow drying
completely. A layer of suitable reinforcing fabric (Glass fiber) should be incorporated within the first coat.
} 2nd coat to be applied in a direction perpendicular to the 1st coat.
Dr. Fixit Roofseal
COLD APPLIED ELASTOMERIC WATERPROOF MEMBRANE
FOR NEW ROOFS
148 Dr. Fixit Roofseal